Image
Image
- How to change CVBS to CVI for PTZ
- How to adjust the audio function of hdcvi camera?
- The standard hdcvi bullet camera installed in the protective cover shows clear images during the day, but fuzzy images at night, and clear images the next day.
- Water mist on hdcvi M bullet cameras.
- HDCVI camera cannot control menu through XVR when the image after power-on is normal.
- In the lower right corner of the hdcvi camera, the battery identification flashes.
- The hdcvi camera ICR keeps switching at night.
- The hdcvi camera has dark images at night.
- After adjusting the noise reduction parameters of the HDCVI camera, how to remove the smear on the image?
- HDCVI camera has image noises at night
- HDCVI camera has smear in its dynamic image.
- The HAC camera installed in the elevator has stripes.
- HAC camera has rolling interference stripes during the day or at night.
- The color in HAC camera picture is abnormal, and not consistent with the actual color.
- Fixed-focus HAC camera that the focus of the image corners might vary from that of the image center. The center is clear, while the edges are not that clear.
- When the motorized vari-focal device is unpacked, its power-on output picture is blurred.
- The HAC camera output picture is poor in definition and blurred.
- The HAC camera picture is upside down.
- After HAC camera is powered on, black and white images appear during the day.
- After HAC camera is powered on, the image appears for a while and then disappears.
- No image output after the camera is powered on.