How to wire the access controller and card reader?

1. Only connect 485 signal: red (12V), black (GND), yellow (485-), purple (485+); connect only Wiegand signal: red (12V), black (GND), green (D0), white ( D1)
2. Note: The sequence of the card reader of the network cable interface is white orange (485+), orange (485-), white green (LED), blue (D0), white blue (D1), green (CASE), white brown (GND) , Brown (12V+)
3. It is recommended to use cat5e network cable for the wiring from the card reader to the controller, and a 4-core pure copper cable with rvv4*1.0 from the controller to the door lock. The distance between the card reader (more than 100 meters) needs independent power supply.